Miele HG01 Installation Instructions Manual page 35

The included toekick will fit without
modification if the machine is set to its
maximum height and the toekick is
recessed as far as possible (4"/10 cm).
If the machine height is less than
maximum, or if the toekick is not
recessed 4" (10 cm), the toekick must
be shortened.
The rear of the toekick has two cutting
lines.
^ Screw the toekick onto the installed
brackets, with the cutting lines
towards the top, and pull out evenly
and slowly until it aligns with the
toekick of the adjoining cabinets.
35