Download Print this page

Troubleshooting - Insignia NS-SP01-BL-C Quick Setup Manual

Advertisement

Charging your speaker
• Connect the small end of your
charging cable to the mini USB port
on your speaker, then connect the
other end to an available USB port
on your computer.
CHARGING
Speaker is off
LED is red
Speaker is on
LED is purple
Turning your speaker on
and off
• Slide the power switch on the
bottom of your speaker to turn it
ON or OFF. The LED turns on or off.
Connecting your speaker
• Take the 3.5 mm cable from the
bottom of your speaker and plug it
into the audio jack on your audio
device.
• When finished, put the 3.5 mm cable
back into the bottom of your speaker
for storage.
Controlling volume and
USB
playback
• Use your audio device to play, pause,
and select tracks.
• Turn the volume wheel to raise or
lower the volume.
NOT
Note: Make sure that the volume level of your
CHARGING
audio device is at least 50%.
LED is off
Rotating the speaker
LED is blue
• Hold the speaker base in place and
turn the speaker head. The speaker
can turn 180° counter-clockwise to
direct sound to where you need it.

Troubleshooting

PROBLEM
SOLUTION
Why is my
• Make sure the 3.5 mm cable
sound
is firmly connected to your
distorted?
audio device.
• Your battery might be low.
Make sure your battery is fully
charged.
How do I know
• Sound will become distorted
when my
when the speaker's battery is
battery is low?
low. Charge the battery.
One-year limited warranty
Visit www.insigniaproducts.com for
details.
Contact Insignia:
For customer service, call
1-877-467-4289 (U.S. and Canada) or
01-800-926-3000 (Mexico)
www.insigniaproducts.com
INSIGNIA is a registered trademark of BBY Solutions, Inc. Registered in
some countries.
Distributed by Best Buy Purchasing, LLC, 7601 Penn Ave South, Richfield,
MN 55423 U.S.A.
©2014 BBY Solutions, Inc. All Rights Reserved.
V1 ENGLISH 14-0098

Advertisement

loading

This manual is also suitable for:

Ns-sp01-s-cNs-sp01-r-cNs-sp01-bk-c