Headphone Socket And Line Out Socket; Speaker Out Socket - Sangean WFR-70 User Manual

Headphone socket
A 3.5mm Headphone Socket located on the rear of your radio is provided for use with
headphones. Inserting a plug automatically mutes the internal loudspeaker.
Please be aware that the sensitivity of headphones can vary widely. We therefore recommend
setting volume to a low level before connecting headphones to the radio. It is also recommended
GB
to reduce the volume before unplugging your headphones.
IMPORTANT:
Excessive sound pressure from earphones and headphones can cause hearing loss.
To prevent possible hearing damage, do not listen at high volume levels for long periods.
Line out socket (3.5mm Jack)
A 3.5mm Line Out socket located on the rear of your radio is provided for connecting the audio
signal to an external amplifier. Inserting an audio cable into this socket will not mute the internal
loudspeaker. Set the volume control on the radio to minimum if desired.

Speaker out socket

To enjoy stereo sound of all your music, your radio allows you to add a Sangean SP-40 speaker
to create a stereo sound experience.
Connect your radio's speaker output socket to Sangean SP-40's speaker input socket with a
supplied speaker cord (coming along with SP-40). When it connects successfully, stereo indicator
on your radio will illuminate.
IMPORTANT:
Do not switch on the power until the speaker system is connected.
74