Options Adjustments - Panasonic TH-42PH11RK Operating Instructions Manual

Options Adjustments

1
2
3
4
5
6
Item
Weekly Command
Timer
Onscreen display
Initial INPUT
Initial VOL level
Maximum VOL level
38
Downloaded From TV-Manual.com Manuals
Press to display the Setup menu.
Press to select "OSD Language".
Press and hold until the Options menu is displayed.
Press to select your preferred menu.
Press to adjust the menu.
Press to exit from Options menu.
Sets Weekly Command Timer. (see page 41)
On: Displays all the following on screen.
• Power on display
• Input signal switch display
• No signal display
• Mute and the remaining time of off-timer after
Off: Hides all the items above from view.
Off PC INPUT1
Adjusts the input signal when the unit is turned on.
Notes:
• Only the adjusted signal is displayed. (see page 14)
• Signal can be displayed when the Terminal board is installed.
• This menu is available only when "INPUT lock" is "Off".
• When a dual input terminal board is attached, A or B is displayed depending on the selected input signal.
(Ex. INPUT1A, INPUT1B)
Press button to adjust the volume when the unit is turned on.
Off On
Off: Sets normal volume.
On: Sets your preferred volume.
Notes:
• When "Maximum VOL level" is "On", the volume can only be adjusted between 0 and your maximum range.
• You can hear the changed volume regardless of your volume setting before opening the options menu
if you adjust the volume when "Initial VOL level" is "On" and cursor is on the menu.
Press button to adjust the maximum volume.
Off On
Off: Sets auto maximum volume.
On: Sets your preferred maximum volume.
Notes:
• If the "Maximum VOL level" is set lower than the "Initial VOL level", the "Initial VOL level" automatically
becomes the same as the "Maximum VOL level".
• The volume display can go up to 63 regardless of the settings.
• You can hear the changed volume regardless of your volume setting before opening the options menu
if you adjust the volume when "Maximum VOL level" is "On" and cursor is on the menu.
Adjustments
was pressed.
INPUT2 INPUT3
Options
Weekly Command Timer
Onscreen display On
Initial INPUT O f f
Initial VOL level Off 0
Maximum VOL level Off 0
INPUT lock Off
Button lock
Off
Remocon User level Off
Advanced PIP Off
Options
Off-timer function
Enable
Initial Power Mode
Normal
ID select
0
Remote ID
Off
Serial ID
Off
Display size Off
Studio W/B
Off
Studio Gain
Off
Options 3/3
Off
Slot power
Power On Screen Delay Off
Clock Display
Off
All Aspect Off
Rotate Off
Serial Slot Select Slot1
1/3
2/3