Advanced Settings - Panasonic TH-42PH11RK Operating Instructions Manual

Picture Adjustments
Item
Contrast
Brightness
Darker
Colour
Hue
Reddish
Sharpness

Advanced settings

Item
Black
extension
Input level
Gamma
AGC
W/B High
R
W/B High
G
W/B High
B
W/B Low R
W/B Low G
W/B Low B
Notes:
• Carry out "W/B" adjustment as follows.
1. Adjust the white balance of the bright sections using the "W/B High R", "W/B High G" and "W/B High B" settings.
2. Adjust the white balance of the dark sections using the "W/B Low R", "W/B Low G" and "W/B Low B" settings.
3. Repeat steps 1 and 2 to adjust.
Steps 1 and 2 affect each other's settings, so repeat each step in turn to make the adjustment.
• The adjustment values are memorized separately for each input terminal.
• The adjustment range values should be used as an adjustment reference.
Helpful Hint (
On the remote control unit, while the "Advanced settings" menu is displayed, if either the N button is pressed at any time or
the ACTION ( ) button is pressed during "Normalise", then all adjustment values are returned to the factory settings.
24
Downloaded From TV-Manual.com Manuals
Effect
Selects the proper brightness
and density for the room.
Less More
Adjusts for easier viewing of
dark pictures such as night
Brighter
scenes and black hair.
Adjusts colour saturation.
Less More
Adjusts for nice skin colour.
Greenish
Adjusts picture sharpness.
Less More
Effect
Adjusts the dark shades of the image in gradation.
Less More
Adjustment of parts which are extremely bright and hard to see.
(This cannot be adjusted when the input signal is Digital.)
Less More
S Curve
Down Up
Increases the brightness of dark signal automatically.
Off On
Adjusts the white balance for light red areas.
Less More
Adjusts the white balance for light green areas.
Less More
Adjusts the white balance for light blue areas.
Less More
Adjusts the white balance for dark red areas.
Less More
Adjusts the white balance for dark green areas.
Less More
Adjusts the white balance for dark blue areas.
Less More
/
Normalise
Adjustments
2.0 2.2
Normalisation)
Notes:
• "Colour" and "Hue" settings cannot be
adjusted for "RGB/PC" and "Digital" input
signal.
• You can change the level of each function
(Contrast, Brightness, Colour, Hue,
Sharpness) for each Picture Mode.
• The setting details for normal, dynamic
and cinema respectively are memorized
separately for each input terminal.
• The "Hue" setting can be adjusted for NTSC
signal only during "AV (S Video)" input
signal.
• In Contrast, there is not a noticeable change
even when contrast is increased with a bright
picture or reduced with a dark picture.
Details
2.5