Frequently asked questions
With the aid of the following guide, minor problems can be fixed without a service
call.
,
Repairs should only be carried out by a qualified and trained person in
accordance with local and national safety regulations. Unauthorized repairs
could cause personal injury or machine damage.
What if ...
the dishwasher does not
start?
the dishwasher does not
start, after pressing the
"Start" button and
the "Start" indicator
flashes?
the dishwasher stops
during a program?
the "Intake/Drain"
indicator comes on
during the "Energy
Saver" program?
38
Possible fault
The door is not properly
closed.
The machine is not
plugged in.
The fuse is defective or
the breaker has tripped.
The program selector is
set to "Stop".
The fuse or breaker has
tripped.
The intake water has not
reached the required
temperature of
115 °F/45 °C, the hot
water system may be
overloaded, see "Program
guide".
Fix
Close the door firmly.
Insert the plug.
Reset the circuit breaker.
Make sure it is a 15 A
breaker.
– Turn the program
selector to the desired
program.
– Press the "Start" button.
Reset the circuit breaker.
Make sure it is a 15 A
breaker.
– Start the program
again.
– If the indicator light
comes on again, select
a different program.