Select Boot Array; Serial Number View - Asus Motherboard P4V800-X User Manual

3.3.5 Select Boot Array

1. In the VIA RAID BIOS utility main menu, select Select Boot Array then press
the <Enter> key. The focus is directed to the list of channel used for IDE RAID
arrays.
2. Press the <Enter> key to select a RAID array for boot. The Status of the
selected array will change to Boot. Press <ESC> key to go return to menu
items. Follow the same procedure to deselect the the boot array.
Channel
Serial_Ch0 Master
Serial_Ch1 Master

3.3.6 Serial Number View

1. In the VIA RAID BIOS utility main menu, select Serial Number View then
press the <Enter> key. The focus is directed to the list of channel used for IDE
RAID arrays. Move the selection bar on each item and the serial number is
displayed at the bottom of the screen. This option is useful for identifying same
model disks.
Create Array
Delete Array
Create/Delete Spare
Select Boot Array
Serial Number View
Channel
Serial_Ch0 Master
Serial_Ch1 Master
Serial Number:
3-10
ESC
Drive Name Array Name
XXXXXXXXXX
XXXXXXXXXX
VIA Tech. RAID BIOS Ver 1.xx
Create a RAID array with
the hard disk attached to
VIA IDE controller
F1
,
Enter: Confirme the selection
ESC
Drive Name Array Name
XXXXXXXXXX
XXXXXXXXXX
xxxxxxxx
Chapter 3: Software support
: Exit
Mode Size(GB) Status
xxxxx xxx.xx Hdd
xxxxx xxx.xx Hdd
: View Array/Disk Status
: Move to next item
: Exit
Mode Size(GB) Status
xxxxx xxx.xx Hdd
xxxxx xxx.xx Hdd