Searching A Chapter/Title/Track Directly - Sony MV-65ST Operating Instructions Manual

Operation for playback
To
Stop playback
Eject the disc
Pause
Go to the next chapter,
track, or scene
Go back to the preceding Press .
chapter, track, or scene
Fast forward/
fast reverse
Slow forward
(DVD/Video CD only)/ playing *
Slow reverse
(DVD only)
1
If the resume playback function is activated, you
*
can resume playback later by pressing u. For
details, see "Resume playback" (page 15).
2 DVD/Video CD/Audio CD/MP3/JPEG
*
"X" is displayed on the screen.
3 DVD/Video CD/Audio CD/MP3/JPEG
*
No sound is output during fast forward or fast
reverse.
4 A disc other than a DVD returns to normal
*
playback when a track/MP3 file finishes.
14
Do this
1
Press x*
Press Z on the
player.
2
Press u * .
Press again to
resume playback.
Press >
Press M/m while
3 4
playing* *
Each press changes
the playback speed
as follows: 2 times
normal speed
t 4 times normal
speed t 8 times
normal speed t 16
times normal speed
t 32 times normal
speed t normal
playback speed.
Press y/ while
4
Each press changes
the playback speed
as follows: 1/2 times
normal speed t 1/4
times normal
speedt 1/8 times
normal speedt 1/
16 times normal
speedt 1/32 times
normal speedt
normal playback
speed.
Searching a chapter/title/track
directly
1
During playback or pause, press
(SEARCH) to display search screen.
1
•DVD*
Each time you press (SEARCH), the
search screen changes as follows: "TIME
SEARCH," "SELECT TITLE," and "OFF."
When you press < or , button while
"SELECT TITLE" is displayed in the
screen, the screen toggles between
"SELECT CHAPTER" and "SELECT
TITLE."
•Video CD (only when PBC is off)/Audio
CD* 2
Each time you press (SEARCH), the
search screen toggles between "TIME
SEARCH" and "SELECT TRACK."
2
Press the number buttons to enter the
desired chapter/title/track number.
When "TIME SEARCH" is displayed
When "SELECT TITLE," "SELECT CHAPTER," or
"SELECT TRACK" is displayed
3
Press (ENTER).
1 Search is possible even while the player is
*
stopped.
2 You can use the number buttons on the card
*
remote commander to select the track.
Note
You cannot set "0."