Assembly Instructions - Garden Treasures PG169T-C User Manual

SAFETY INFORMATION
· Clothing or other flammable materials should not be hung on the heater, or placed on, under or
near the heater.
· Children and adults should be alerted to the hazards of high surface temperatures and should
stay away from the item to avoid burns or clothing ignition.
CAUTION
· Minimum clearance to the combustible materials is 24 inches.
· If you don't feel the heater is on a stable surface, use a ground screw to fix the base of the heater
on the surface where the heater is installed. Fix the base on an incline no wider than 15 degrees.
· Any guard or other protective device removed for servicing the heater must be replaced prior to
operating the heater.
· More frequent cleaning may be required as necessary. It is imperative that the control
compartment, burners and circulating air passageways of the heater to kept clean.
· Keep the appliance area clear and free from combustible materials, gasoline and other
flammable vapors and liquids.
· Inspect the visible portion of the hose before each use of the appliance. When portions of the
hose are located within the confines of the heater post, instructions to inspect the entire hose
assembly at least annually. If disassembly is required, the instructions shall also include the
proper procedure for leak checking the connections upon re-assembly.
· More frequent cleaning may be required as necessary. It is imperative the control compartment,
burners and circulating air passageways of the heater are kept clean.
· Keep this manual for future reference and to educate new users of this product.

ASSEMBLY INSTRUCTIONS

1. Remove the door from the housing
assembly (H) by lifting the door off the
hinges. Insert the bottom of the housing
assembly into the top of the plastic ring (I)
and attach to base (J) with short bolts
(CC). Re-attach the door.
Hardware Used
Short Bolt x 4
7
1