Installing Your Unit; Intercom Camera; Installing The Intercom Camera - Uniden UWG 900 Owner's Manual

Intercom Camera
Before installing the intercom camera, check to make sure that both the monitor and
Intercom Camera are operating properly. Select a location that is dry with good air
circulation, free from excessive dust and vibration.
Avoid locating the Intercom Camera onto metallic or reinforced concrete surfaces
and keep it away from metal shelving, mirrors, microwave ovens and wire free
network (WiFi) as this will reduce the operating distance.
Installing the Intercom Camera
1. Using the sunshield as a template, drill 4 suitable holes and attach the sunshield
to the wall using the screws and wall plugs provided.
2. Insert the 6 AA batteries into the grooves at the back of the unit.
OR
Guide the DC cable and unlock connection cable to terminal block via water
resistance plug, then place the back cover and fasten using the screws provided.
3. Fasten the intercom camera to sunshield by using the anti-theft screws provided.
Installing the Intercom Camera (batteries)
Installing the Intercom Camera (DC Power)

INSTALLING YOUR UNIT

5