Table of Contents
Advertisement
4 System Setup
5 Alarm Buzzer
6 Pan/Tilt/Zoom
7 Scan Activated
Cameras
8 Memory Card
Overwrite
9 Back Key
CAMERA SETUP
From this selection on the main menu-
The Camera Setup screen has the following options:
• Pair a New Device
• Image Brightness
• Activate or Deactivate Camera (outdoor camera only)
Pair a New Device
Your cameras are paired to the monitor at the factory. You can add 1 more
accessory outdoor camera to your system; see our website (listed on the front
cover) for more information on how to buy accessory cameras for this system.
When you add an accessory camera, you have to pair it to the monitor (that is, you
have "introduce" the camera and monitor so they can communicate).
14
Date and Time
TV Output
Power Saving
Multi Channel Idle
Display
Default
Set the date (yy/mm/day) and time
(hour/minute).
Set the TV Output (NTSC/PAL).
Set the idle time required (5 or 10
mins) before the system changes to
power saving mode. ALWAYS ON
blocks the power saving mode.
Set how the camera will display
during idle mode (quad, single or
scan).
Set the default language.
Set the alarm to sound if the outdoor
camera detects movement
Zooms in the viewing area.
Activates Scan mode.
Allows the oldest files to be deleted,
when the SD card is full.
This screen should display:
Advertisement
Table of Contents
