Advertisement
AIRSTREAM CLASSIC TRAILER OWNERS MANUAL
MOEN LAVATORY FAUCET
1. Handle
2. Lever mechanism
3. Retainer clip
4. Transition collar
5. Cartridge
6. Flo-control aerator
NOTE: See end of faucet section for
removal of cartridge.
MOEN SHOWER MIXING VALVE
ASSEMBLY
LAVATORY FAUCET AND SHOWER MIXING VALVE CARTRIDGE REMOVAL
Shut off water pressure for entire system.
Disassemble: Remove handle cover. Take out handle screw and remove handle and stop tube, Lift out
retaining clip and pull the cartridge out of the body by the stem.
CAUTION
: Reinsert cartridge by pushing it all the way into the body and until the front of the
ears on the cartridge shell are flush and aligned with the body. Replace the retainer clip so that the
legs straddle the cartridge ears and slide down into the bottom slot in the body. This prevents the
cartridge from rotating and locks it in the body. Reinstall stop tube and handle. Tighten handle
screw securely, and replace the handle cover. The red flat on the stem must point UP when mounting
the knob handle (down for lever handle).
If cold water is on left side and hot water is on right side (red flat pointed down), remove cartridge and
reinstall 180 degrees.
1. Handle Cover
2. Handle
3. Cartridge
4. Handle Screw
5. Valve Body
6. Stop Tube
7. Retainer Clip
F-20
Advertisement
