Hitman HD-10 Owner's Manual page 9

Panel Controls
1. MASTER VOLUME
2.[CLICK] BUTTON
3.[TEMPO/TAP] BUTTON
4.[RECORD] BUTTON
5.[PLAY/STOP] BUTTON
6.[KIT] BUTTON
7.[SONG] BUTTON
8.[DRUM OFF] BUTTON
9.[+/- ] BUTTONS
10.[SETUP] BUTTON
11.[ENTER] BUTTON
12.[COUNT] BUTTON
13.[BACK] BUTTON
14.DRUMS SELECTION
Adjust the overall volume of the drum module with this pot. It controls the line
outputs and the headphone output.
This button turns the metronome on and off at any time,
level of Click Edit mode.
You can adjust the tempo of the built-in metronome, the practice songs, or the song
you are recording by pressing
the drum pads.
Gives you the option to record your own song or practice session.
Start or stop playing a song, recording etc...
Kit Edit enables you to
mode
each pad and adjust its volume or effects settings, etc.
Press this button to play the song and also lets you adjust the relative volumes of the
drum and accompaniment tracks.
Turn on or off the sound of the drum in a song.
Use these buttons to navigate through the 50 drum kits, change menu selections and
parameter values. Pressing them both at once will reset the value of the current
parameter to its default setting.
Press [Setup] to access
module equally, such as the sensitivity, threshold, and velocity curve for each pad.
This button will confirm and save the parameter changes you have made. It is also
used to access the sub-pages of each menu.
Count the number of drum hits
Pressing this button takes the drum module to the previous menu. From the highest
Edit menu it will exit to the Kit Select menu, except in Song mode where it will exit
into the Song Select menu.
Corresponding button of the drum pads, include: HI-HAT, CRASH, TOM1, TOM2,
TOM3, RIDE, RIM, HI-HAT CONTROL, SNARE, KICK.
[Tempo/Tap]
. You can also set the tempo by hitting
select which instrument (drum sound) is played by
parameters that affect all of the kit presets in the drum
in the certain period.
6
except from within the top