Hitman HD-10 Owner's Manual page 22

Begin Playing the Drums
B. Defeating the Effects for All Drum Kits (EFCT)
We have added reverb effects to many of the drum kits. However, it's possible you might want
to turn off the reverb for all of the drum kits and process the audio with an external effects
unit. To do this:
1. Press the [Setup] button: the LCD will display"TRIG"
2. Use the [-/+] buttons to select the" EFCT" menu.
SETUP
3. Press the [Enter] button and use the [-/+] buttons to select the "REVB" or "CHRS"
4. Press the [Enter] and use the [-/+] buttons to select one of the following options:
REVB: "OFF"" HAL1"" HAL2""ROM1""ROM2"" ROM3"" STG1"
" STG2"" PLAT"" DLAY""ECHO".
CHRS: "OFF""CHR1""CHR2""CHR3""CHR4""FDBK""FLG1"
"SDLY""SDFB""FLG2""FLG3""CLS1""CLS2""CLS3"
5. Press the [Enter] button again to confirm your choice or press the [Back] button to exit to the
previous menu without having changed anything.
C. Using the Drum Pads as MIDI Triggers Only (LOCL)
You might want to use the pads to trigger another sound source over USB but not hear the drum
module's internal sounds at the same time. This condition is known as "Local Off."
useful if you are triggering the drum module's sounds via USB MIDI and want to eliminate any
double triggering.
To configure the drum module in this way, do the following:
1. Press the [Setup] button: the LCD will
2. Use the [-/+] buttons to select the "LOCL" menu.
3. Press the [Enter] and use the [-/+] buttons to select either "Off" or "On" depending on
what you want to do. "On" is the normal operating mode: when you play the pads the
internal sounds will trigger. "Off" will not trigger the internal sounds directly.
4. Press the [Enter] to confirm the choice, or press the [Back] to exit without making any changes.
SETUP
"TRIG"
display
19
Mode Parameter/Value
K i t S e l e c t
K i t E d i t
S e t u p
Te m p o S o n g
C l i c k
It can also be
Parameter/Value
Mode
K i t S e l e c t
K i t E d i t
S e t u p
Te m p o S o n g
C l i c k