Checking Before Operation - Branson 8050 Operator's Manual

OPERATIONS & WORK

CHECKING BEFORE OPERATION

• Do not provide illumination with a lit cigarette
or a lighter when fueling.
• Never fill the fuel tank while the engine is run-
ning or hot.
DANGER
• After filling the fuel tank, close the fuel filler
cap completely and wipe off the excess fuel
thoroughly.
• If the fuel hoses are damaged, fuel will leak.
Make sure that you check for any leakage.
• Perform the maintenance on a flat and safe
location that will keep the tractor in place and
will not cause a risk to people passing by.
Before carrying out the maintenance, place
blocks at the front tires to prevent movement.
WARNING
[Otherwise]
An unexpected accident may occur, such as over-
turning of the tractor.
• When going under the implement, fully close
the slow/stop valve.
[Otherwise]
There is a risk of injury due to implement falling.
• If the fuel hoses are damaged, fuel will leak.
Make sure that you check for any leakage.
8050 OPERATORS MANUAL (122011).indd 89
• Stop the engine during checking, mainte-
nance, or repair
• Carry out the maintenance work after heated
area such as the muffler or the engine have
CAUTION
fully cooled down.
[Otherwise]
There is risk of burn.
• After detaching the covers for checking or
maintenance, make sure to put them back in
their place
[Otherwise]
There is a risk that you may get entangled in the
tractor
or get injured.
• If the fuel hoses are damaged, fuel will leak.
Make sure that you check for any leakage.
• • •
89
1/10/2012 9:36:42 PM