Standard Accessories; Optional Accessories (Sold Separately); Battery Removal/Installation - Hitachi C 7D Handling Instructions Manual

STANDARD ACCESSORIES

C7D (BFK)
Standard accessories are subject to change without notice.

OPTIONAL ACCESSORIES (sold separately)

1. Battery (EB2420)
2. Saw Blade
Use ... Cutting various types of wood.
External Diam. Hole Diam.
185 mm
3. Guide
4. Dust Collector Set
Connect the suction hose to collect saw dust with
the vacuum cleaner.
1
1 Saw Blade (mounted on tool) ................................................................................. 1
2 Box Wrench ................................................................................................................. 1
3 Charger (UC24YFB) ..................................................................................................... 1
4 Plastic case ................................................................................................................... 1
No. of teeth
15.9 mm 18 Pieces
2
Dust Collector
(Attached condition)
Optional accessories are subject to change without
notice.
APPLICATION
Cutting various types of wood.

BATTERY REMOVAL/INSTALLATION

1. Battery removal
Withdraw the battery from the tool while pressing
the latches on both sides of the battery. (Fig. 8)
CAUTION:
Never short-circuit the battery.
2. Battery Installation
Align both guide rails of the battery and the tool.
Always insert the battery all the way until it locks
in place with a little click, If not, it may accidentally
fall out of the tool, causing injury to you or someone
around you. (Fig. 8)
Pull out
Latch
Battery
3
Insert
Push
Fig. 8
4
5