Replacing The System Board - Gateway Tower User Manual

Replacing the system board

To replace the system board:
1
Identify the computer case style. For more information, see "Identifying
the computer case style" on page 222.
2
Open the case using the instructions in "Opening the case" on page 242.
3
Remove all of the add-in cards using the instructions in "Adding or
replacing add-in cards" on page 254.
4
Disconnect the power and data cables from the system board, noting their
locations and orientation. (You will reconnect the cables after you install
the new board.)
5
Remove the thumbscrew using a screwdriver, coin, or your fingers.
Upgrading the Gateway Micro Tower Case
Thumbscrew
(approximate location)
www.gateway.com 259