Making A Telephone Call - Gateway Tower User Manual

Making a telephone call

Important
To make a telephone call:
1
If PhoneTools is not open, click
PhoneTools
2
Click the number keys in the PhoneTools dialer for the telephone number
that you want to dial.
- OR -
Type the telephone number using the keyboard.
3
Make the call on the speakerphone by clicking
external speakers and a microphone connected to your computer.
- OR -
Make the call on the telephone handset by picking up the handset, then
clicking on the handset on the screen. You must have a telephone
connected to your computer.
Important
4
To end the call, click
Important
Your modem cable must be installed before you can make
telephone calls. You cannot use your standard telephone
modem to connect to the Internet while making a
telephone call.
. If the Phone controls are not visible, click
If you attach a microphone and the person you call cannot
hear you, your microphone may be muted. For information
about unmuting your microphone, see "Adjusting the
volume in Windows XP" on page 82 or "Adjusting the
volume in Windows 2000" on page 85.
(hangup).
PhoneTools may be set up to re-dial a telephone number
if the line was busy. To prevent PhoneTools from re-dialing
your call, click Setup, then click General Setup. Click the
Communication tab, then set the number of transmission
attempts to none.
www.gateway.com
, ,
Start All Programs PhoneTools
Speaker
Using telephone features
, then click
.
Phone
. You must have
129