Replacing The Power Supply - Gateway Tower User Manual

Warning
7
Insert the new card into the add-in slot.
You can slightly seesaw the card end-to-end to help insert the card, but
do not bend the card sideways.
8
Push the add-in card retention cover inward, then secure the add-in card
retention cover with the retention thumb-screw.
9
If you disconnected any cables, reconnect the add-in card cables using your
notes from Step 4. See the add-in card documentation for more
information.
10
Close the case using the instructions in "Closing the case" on page 226.
11
See the documentation that came with the add-in card for any special
software installation instructions.

Replacing the power supply

To replace the power supply:
1
Identify the computer case style. For more information, see "Identifying
the computer case style" on page 222.
2
Open the case using the instructions in "Opening the case" on page 223.
Upgrading the Gateway Tower and Mid Tower cases
Do not touch the contacts on the bottom part of the add-in
card. Touching the contacts can cause electrostatic
damage to the card.
www.gateway.com 235