Safety Precautions; Maintenance - Konig CMP-2DTO3DCONV User Manual

Procedure for switching sources:
You can connect a second source to the converter box. If both sources are connected and powered on,
you can switch between HDMI input channels by pressing the source button on the front panel or on the
remote.
Front panel LED status indicator:
Action/ LED sequence

Safety precautions:

Maintenance:

Clean only with a dry cloth. Do not use cleaning solvents or abrasives.
State
OFF
Initialize
Ready, No TV
HDMI – 1, Bypass
HDMI – 1, 2D > 3D
HDMI – 1, 3D (SBS) > 3D
HDMI – 1, 3D (TAB) > 3D
HDMI – 1, 3D (FP) > 3D
HDMI – 1, 3D > 2D
HDMI – 1, BYPASS
HDMI – 2, 2D > 3D
HDMI – 2, 2D > 3D
HDMI – 2, 3D (SBS) > 3D
HDMI – 2, 3D (TAB) > 3D
HDMI – 2, 3D (FP) > 3D
Tx display invalid
USB update in progress
Actualization USB completed
USB update cancelled
USB update cancelled
USB update failed
To reduce risk of electric shock, this product should ONLY be
opened by an authorized technician when service is required.
Disconnect the product from mains and other equipment if a
problem should occur. Do not expose the product to water or
moisture.
3
Notes
Connect power cable
Should last no longer then 2 seconds
Also default state if TV and no Rx
device
Also default state if TV and no Rx
device
Invalid display type connected
(flashing LEDs)
Bad USB key
Bad file
USB upgrade procedure must be
repeated (flashing LEDs)