Miele KWL 4612 S Operating And Installation Instructions page 26

The appliance is supplied right hand
hinged. If left hand door hinging is
required, follow the instructions below.
First the side section of the handle must
be removed:
^ Pull door handle a towards you. Side
section b slides back, creating a
gap d between side section b and
mounting plate c.
^ Place a suitable object (e.g. a spoon
handle) in gap d, and slowly lever
the handle towards the door.
Be careful not to let the "spoon
handle" slip, causing damage to the
appliance.
The side section b can now be
removed.
^ Pull side section b out of the guides
on the mounting plate.
^ Loosen the 4 screws (Torx 15) in the
mounting plate, and remove the
handle.
26
^ Remove the cover caps from the
opposite side, and fit them into the
empty holes.
^ Close the appliance door, unscrew
hinge bracket a, and take the door
off.
^ Take hinge pin b out of the hinge
bracket, then refit it in the second
hole of the hinge bracket. (Use the
spanner supplied to unscrew and
refit the hinge pin).
^ Use the spanner supplied to unscrew
upper hinge pin c, and refit it on the
other side.
^ Remove stoppers d, and unscrew
bracket e . Refit the bracket and
stoppers on the other side of the
door.