Midland LXT320 Series Owner's Manual page 9

Model LXT320/420 Series
LXT320/420 SERIES QUICK REFERENCE CHART
MENU Channel
Press Menu
button when
in WX Band 1~22
WX Channel
1~10
MONITOR
Pressing and holding the MONITOR button for 3 seconds will let you
hear noise so you can adjust the volume level of the radio when not
receiving a signal. This could also be used to check any activity on
your current channel before transmitting.
Press and hold the MONITOR button for 3 seconds again to get out
of MONITOR mode.
SCAN
Your LX320/420 Series can scan all 22 channels for activity. To enter,
quickly press the SCAN button. Repeat the same procedure to exit.
Your radio will rapidly scan each of the 22 channels and stop on any
active channel for 4 seconds before resuming scan.
When you press the PTT button to transmit on an active channel, the
scanning function will stop and remain on the active channel. To
resume scanning, quickly press the SCAN button.
CALL ALERT
Your LXT320/420 Series can transmit a call alert for a fixed length of
time. To send a call alert, press the CALL button. The TX icon will
appear while transmitting a call alert and a tone can be heard on the
speaker for confirmation.
KEYPAD LOCK
To avoid accidentally changing the radio setting, press the LOCK
button for 4 seconds. The KEY LOCK icon will appear on the display.
PTT and CALL will still be active. Repeat the same procedure to
unlock the keypad.
Page 9
VOX
Power
Privacy
oF/1/2/3
H/L
CTCSS oF~38
oF~83
DCS
LXT420 Series only
Roger Beep
Vibrate
On/Off On/Off
www.midlandradio.com
®
Call Alert
Silent Operation
1~5 On/Off
WX Band
On/Off