Panasonic WV-SW316L Installation Manual page 35

b
Mount the tripod head on the top of the camera body with the 4 tripod head mounting screws
that were removed in the step 2.
IMPORTANT:
• Caution shall be taken to prevent each cable from being caught between the camera body and
tripod head.
• Be sure to use the screws that were removed from the tripod head.
Recommended tightening torque: 0.59 N·m {0.44 lbf·ft}
n
Secure the camera to the camera mount bracket with the camera fixing screws x3 (accessory).
Pass each cable and the safety wire through the camera mount bracket, and connect the safe-
ty wire to the camera mount bracket. Then, bundle the wire and the cable using the cable
clamp and secure them with each screw from the mounting boss to the camera mount bracket
( page 20-21).
☞
Tripod head fixing screw x4
(M3x10)
IMPORTANT:
• Be sure to use the screws that were removed from the camera mount bracket.
Recommended tightening torque: 0.78 N·m {0.58 lbf·ft}
• Be sure to use the screws that were removed from the safety wire.
Recommended tightening torque: 0.59 N·m {0.44 lbf·ft}
Camera fixing screw x3 (M4 x 8)
(accessories)
Camera main body
(This illustration represents WV-SW316.)
Camera mount bracket
35