System Power-Up; Function Test - Mazda MX-5 Installation Instructions Manual

14

SYSTEM POWER-UP

1. VERIFY THAT ALL CONNECTIONS ARE SECURE AS PER INSTALLATION INSTRUCTIONS.
NOTE:
BE SURE THE ROOM FUSE IS INSTALLED IN THE FUSE PANEL.
2. RECONNECT THE NEGATIVE BATTERY TERMINAL.
3. IF THE HORN IS BEEPING AND THE PARKING LIGHTS FLASHING, TURN THE IGNITION TO THE ON POSITION AND PRESS THE EMERGENCY
OVERRIDE BUTTON LOCATED ON THE DRIVER'S KICK PANEL TO DISARM THE SYSTEM.
4. ENSURE THE IGNITION IS IN THE OFF POSITION BEFORE PROCEDING TO THE FUNCTION TEST.
15

FUNCTION TEST

1. CLOSE ALL DOORS, THEN PRESS THE LOCK BUTTON ON THE KEYLESS ENTRY TRANSMITTER TO LOCK ALL DOORS.
a. THE HORN BEEPS (1) TIME.
b. THE PARKING LIGHTS FLASH (1) TIME.
c. THE RED LED STATUS INDICATOR BEGINS BLINKING (@ 1 BLINK PER SECOND).
2. MANUALLY UNLOCK AND OPEN THE DRIVER'S DOOR.
a. THE HORN BEEPS ON AND OFF.
b. THE PARKING LIGHTS FLASH ON AND OFF.
c. THE RED LED FLASHES (3) TIMES...PAUSE AND REPEATS CONTINUALLY.
3. PRESS THE UNLOCK BUTTON ON THE KEYLESS ENTRY TRANSMITTER TO UNLOCK THE DRIVER'S DOOR.
a. THE HORN BEEPS (4) TIMES.
b. THE PARKING LIGHTS FLASH (4) TIMES.
c. THE RED LED FLASHES (3) TIMES...PAUSE AND REPEATS CONTINUALLY.
4. TURN THE IGNITION TO THE RUN POSITION, THEN BACK TO THE OFF POSITION. REMOVE THE KEY, IF APPLICABLE.
a. THE RED LED TURNS OFF.
5. CLOSE ALL DOORS, THEN LOCK THE DOORS USING THE DRIVER'S SIDE DOOR KEY CYLINDER.
a. THE HORN BEEPS (1) TIME.
b. THE PARKING LIGHTS FLASH (1) TIME.
c. THE RED LED STATUS INDICATOR BEGINS BLINKING (@ 1 BLINK PER SECOND).
6. USE THE DRIVER'S DOOR KEY CYLINDER TO UNLOCK THE DRIVER'S DOOR.
a. THE HORN BEEPS (2) TIMES.
b. THE PARKING LIGHTS FLASH (2) TIMES.
c. THE RED LED STATUS INDICATOR TURNS OFF.
7. ENTER THE VEHICLE AND CLOSE THE DRIVER'S DOOR.
8. PRESS THE LOCK BUTTON ON THE KEYLESS ENTRY TRANSMITTER.
a. THE HORN BEEPS (1) TIME.
b. THE PARKING LIGHTS FLASH (1) TIME.
c. THE RED LED STATUS INDICATOR BEGINS BLINKING (@ 1 BLINK PER SECOND).
8
1031733 Rev. A 05/06