Advertisement
D2 Lite SWiM Module Ports Assignments
D2 Lite (V1 & V2) can accommodate up to 2 SWiM16 modules, for a total of 32 SWiM
tuners, in a single enclosure. The enclosure is shipped with one SWiM16 module fully
installed and is pre-wired for one additional SWiM16 module. There are a total of 8
output ports available for use. The ports are labeled APMT FEED 1,2,3,4,5,6,7,8
The ports with a " * " next to them are wired to the SWiM splitters installed in the enclosure and
will have a signal level approximately 4.5dBm lower than the other ports due to the loss of the
SWiM splitter. These ports should be connected to the units with the shortest homerun lengths.
APMT FEED ports 5, 6, 7, 8 are fed from SWiM module #2 (top SWiM module)
APMT FEED ports 1, 2, 3, 4 are fed from SWiM module #1 (bottom SWiM module)
Advertisement
