Advertisement
Installing in the Unit Continued
The unit equipment install follows standard DIRECTV
installation practices
A PI-29 Power Inserter must be installed in every unit
The PI-29 provides the required voltage to the D2 Lite enclosure to power the
SWiM16 module(s)
2 and 4 way splitters may be installed in the unit
Properly terminate any open (unused) ports on the splitters
SWiM tuner count, for any single unit, cannot exceed 8 tuners
Any compatible SWiM receiver/device can be installed in the unit
All DIRECTV programming, services and national offers are available
to the customer
Note: Due to the unique design of the Holland splitters in the D2 Lite
enclosure up to 8 PI-29 power inserters can be connected to the D2 Lite
enclosure without causing an "overvoltage" or "power overload"
situation.
Advertisement
