Midland LXT340 Series Owner's Manual page 10

Model LXT340/345 Series
TRANSMIT (TX) POWER LEVEL SELECTION
Your LXT340/345 Series has 2 power level settings. To select the
power level on channels 1~7 and 15~22, press the MENU button until
a "Pr" icon will appear blinking on the display. Then press the
buttons to select TRANSMIT POWER LEVEL icon (H: Hi/L: Lo). To
confirm, press the PTT button or press MENU button again to move to
the next feature setting.
!
Note : You cannot adjust the power setting on the FRS
channels (8~14). They are set to Low power per FCC
regulations.
ROGER BEEP (end of transmission) TONE
When the PTT button is released, the radio will beep to confirm to
other users that your transmission has finished.
To turn the ROGER BEEP tone on, press the MENU button until the
display shows an "rb" icon while on the right of the "rb" display, an
"oF" icon appears. Select "on" by pressing the
the PTT key, or press MENU button to move to the next feature
setting.
To turn the ROGER BEEP tone off, press the MENU button until the
display shows an "rb" icon while on the right of the "rb" display, an
"on" icon appears. Select "oF" by pressing the
the PTT key, or press MENU button to move to the next feature
setting.
SILENT OPERATION
Your LXT340/345 Series has a SILENT OPERATION mode. In this
mode, all "beeps" and "tones" are disabled.
To turn the SILENT OPERATION mode on, press the MENU button
until the display shows an "bP" icon while on the right of the "bP"
display, an "on" icon appears. Select "oF" by pressing the
and push the PTT key or MENU button.
To turn the SILENT OPERATION mode off, press the MENU button
until the display shows an "bP" icon while on the right of the "bP"
display, an "oF" icon appears. Select "on" by pressing the
and push the PTT key or MENU button.
Page 10
/
buttons and push
/
buttons and push
/
/
www.midlandradio.com
®
/
buttons
buttons