Table of Contents
Advertisement
Safet y Precautions
Safeguards
Observe the following safety precautions when you are connecting
or disconnecting any devices.
Operation Safety
IMPORTANT
•
Any operation on this server must be conducted by
certified or experienced engineers.
•
Before operating your server, carefully read all the
manuals included with the server package.
•
Before using the server, make sure all cables are correctly
connected and the power cables are not damaged. If any
damage is detected, contact your dealer as soon as
possible.
•
To avoid short circuits, keep paper clips, screws, and
staples away from connectors, slots, sockets and circuitry.
•
Before opening the chassis panels, make sure all power
cables are unplugged.
•
Avoid dust, humidity, and temperature extremes. Place the
server on a stable surface.
•
If the power supply is broken, do not try to fix it by
yourself. Contact an authorized dealer.
•
It is recommanded that you wear gloves when assembling
or dissembling the server to protect from cuts and
scrapes.
•
When the server is powered on, heat sinks and the
surfaces of certain IC devices may be hot. Do not touch
them. Check whether the fans are functioning properly.
Tools Required
You need a Philips (cross) screwdriver and a flat screwdriver to install
or remove the components in the server.
5
Advertisement
Table of Contents
Need help?
Do you have a question about the DualPentum III 1U Rackmount Server AP1400R and is the answer not in the manual?