KSE-LIGHTS TL-11200 User Manual

User manual for KSE-LIGHTS LED-Floodlight
I. Features
II. Technical parameters
power: 200 W
frequency: 50 – 60 Hz
life time: > 50.000 Stunden
protection grade: IP 65
protection against jetted water from all directions
III. Use
1. Carefully take the product out of the packaging removing any transport safeguards.
2. The product is solely suited for installation on the wall, ceiling and floor.
3. Fasten the fixture to the installation place using properly dimensioned fastening materials.
4. Connect the floodlight with a power source.
5. Check if the product functions properly and if it is securely fixed.
6. The product is now ready for operation.
IV. Warning
1. Do not let the lamp drop and avoid impact.
2. Do not cover the product, do not hang or fasten anything on the product.
3. Never open the floodlight. In case of failure, please return the lamp to seller, NEVER open!
4. Mounting or works on the electrical connection may only be carried out by an approved electrician.
5. Never direct the light of the lamp directly in the eyes of humans or animals!
6. The floodlight may only be opened by specialists that are authorised by KSE-LIGHTS. Being opened
without authorisation, the floodlight will lose its warranty and safety can no longer be guaranteed.
7. Never look at visible LED radiation with optical instruments.
8. Looking at the radiation source with optical instruments can cause danger for eyes.
Brunnenstraße 8 Brunnenstraße 8
58285 Gevelsberg 58285 Gevelsberg
Germany Germany
TL-11200
Model
Please read the manual before use.
Phone +49 (0) 2332 – 50 90 100 Phone +49 (0) 2332 – 50 90 100
Fax Fax +49 (0) 2332 – 50 90 102 +49 (0) 2332 – 50 90 102
info@kse-lights.com info@kse-lights.com
without ATEX permission
operating voltage:
AC 85-265
weight: 15000g
1
www.kse-lights.com www.kse-lights.com