Disconnecting A Bluetooth Connection; Listening To Dab Stations; Preparing For Dab Reception - Yamaha TSX-B235D Owner's Manual

LISTENING TO MUSIC FROM YOUR Bluetooth COMPONENT

Disconnecting a Bluetooth connection

If any of the following operations are performed while a Bluetooth connection is being used, the Bluetooth connection will be
disconnected.
• Hold down source button on this unit or
• Turn the unit off.
• Turn off the Bluetooth setting of the other component.
• Hold the smartphone with the NFC function over the NFC mark during Bluetooth connection.
DAB (Digital Audio Broadcasting) and DAB
analog signals.
+
DAB is based on the original DAB standard but uses a more efficient audio codec.
+
DAB and DAB are broadcast in blocks of data called "ensembles" containing up to several radio stations that are
simultaneously broadcast.
DAB and DAB + can also include an extensive amount of text information, enabling you to select a station by name.
Other information, such as the ensemble name or the status of the digital signal, can be displayed on the front panel display.
"DAB" described in this manual may also refer to "DAB

Preparing for DAB reception

Before tuning into DAB stations, an initial scan must be performed. When you select the DAB for the first time, the initial
scan is performed automatically.
To listen to a DAB station, connect the antenna (☞ P. 3).
AUX
USB
RADIO
CD
Performing the initial scan again (remote control only)
1 2
12
En
on the remote control.

LISTENING TO DAB STATIONS

+ use digital signals for clearer sound and more stable reception compared to
+ ".
Press the RADIO source button to switch the
audio source to DAB.
The initial scan starts. During the scan, the degree of
progress is displayed on the front panel display.
When scan is completed, the number of receivable DAB
stations appear on the front panel display.
If the initial scan is performed, stored DAB station information
and preset DAB stations are cleared.
1 Press and hold down MEMORY on the
remote control.
"DAB INIT SCAN" will appear and
"Press MEMORY" will blink.
2 Press MEMORY.
The initial scan starts.