Philips Brilliance 221P6 User Manual page 35

10. Troubleshooting & FAQs
Q10 Are Philips LCD monitors Plug-and-
Play?
Yes, the monitors are Plug-and-Play
compatible with Windows 8.1/8/7, Mac
OSX
Q11 What is Image Sticking, or Image Burn-
in, or After Image, or Ghost Image in
LCD panels?
Ans.
Uninterrupted display of still or static
images over an extended period
may cause "burn in", also known as
"after-imaging" or "ghost imaging", on
your screen. "Burn-in", "after-imaging",
or "ghost imaging" is a well-known
phenomenon in LCD panel technology.
In most cases, the "burned in" or
"atter-imaging" or "ghost imaging" will
disappear gradually over a period of
time after the power has been switched
off.
Always activate a moving screen saver
program when you leave your monitor
unattended.
Always activate a periodic screen
refresh application if your LCD monitor
will display unchanging static content.
Warning
Failure to activate a screen saver, or a periodic
screen refresh application may result in severe
"burn-in" or "after-image" or "ghost image"
symptoms that will not disappear and cannot be
repaired. The damage mentioned above is not
covered under your warranty.
Q12 Why is my Display not showing
sharp text, and is displaying jagged
characters?
Ans. Your LCD monitor works best at its
native resolution of 1920 x 1080 @
60 Hz. For best display, please use this
resolution.
Q13 How to unlock/lock my hot key?
Ans. Please press
to unlock/lock the hot key, by doing so,
your monitor pops out "Attention" to
show the unlock/lock status as shown
below illustrators.
33
for 10 seconds
Attention
Monitor control unlocked
Attention
Monitor control locked