select
Menu
Applications
>
data
Options
Satellite
>
>
If your device has found
satellites, a bar for each
satellite is shown in the
satellite info view. The
longer the bar, the
stronger the satellite
signal. When your device has received enough data
from the satellite signal to calculate your location, the
bar color changes.
To view the positions of found satellites, select
view.
Initially your device must receive signals from at least
four satellites to be able to calculate the coordinates
of your location. When the initial calculation has been
made, it may be possible to continue calculating the
coordinates of your location with three satellites.
However, the accuracy is generally better when more
satellites are found.
If no satellite signal can be found, consider the
following:
If you are indoors, go outdoors to receive a better
●
signal.
If you are outdoors, move to a more open space.
●
Ensure that your hand does not cover the GPS
●
antenna of your device.
Location
and
GPS
>
status.
Chg.
If the weather conditions are bad, the signal
●
strength may be affected.
Some vehicles have tinted (athermic) windows,
●
which may block the satellite signals.
Position requests
You may receive a request from a network service to
receive your position information. Service providers
may offer information about local topics, such as
weather or traffic conditions, based on the location of
your device.
When you receive a position request, the service that
is making the request is displayed. Select
allow your position information to be sent or
deny the request.
Landmarks
Select
Menu
Applications
>
Landmarks.
With Landmarks, you can save the position information
of specific locations in your device. You can sort the
saved locations into different categories, such as
business, and add other information to them, such as
addresses. You can use your saved landmarks in
compatible applications, such as GPS data.
Accept
to
Reject
to
Location
and
>
87