Subscribe to Our Youtube Channel
Related Manuals for Star Max 624MD-LP
Summary of Contents for Star Max 624MD-LP
- Page 1 ® GRIDDLES MODELS 624MD-LP, 624TD-LP 636MD-LP, 636TD-LP 648MD-LP, 648TD-LP Installation and Operation Instructions 2M-Z6182 Rev. C 2/22/07 648MD-LP...
-
Page 2: Safety Symbol
SAFETY SYMBOL These symbols are intended to alert the user to the presence of important operating and maintenance instructions in the manual accompanying the appliance. RETAIN THIS MANUAL FOR FUTURE REFERENCE NOTICE Using any part other than genuine Star factory supplied parts relieves the manufacturer of all liability. -
Page 3: Specifications
SPECIFICATIONS 624MD-LP Type: Manual Control 2 Controls, 40,000 BTU, 498 sq. in. (3213 sq. cm) Grid Area, 3/4" (1.9 cm) Plate Thickness Approximate Weight: Installed - 165 Lb (74.8 kg), Shipping - 175 Lb, (79.4 kg) Dimensions: 24" - Width, 27-3/4" - Depth, 13-1/2" - Height (61 cm - Width, 70.5 cm - Depth, 34.3 cm - Height) -
Page 4: General Installation Data
GENERAL INSTALLATION DATA CAUTION This equipment is designed and sold for commercial use only by personnel trained and experienced in its operation and is not sold for consumer use in and around the home nor for use directly by the general public in food service locations. The Star-Max™... - Page 5 AIR SUPPLY Make certain not to obstruct the fl ow of combustion and ventilation air. Provisions for adequate air supply must be furnished. The legs supplied with the unit must be installed. Make certain that air intake openings in the bottom of the appliance are not obstructed. They are essential for proper combustion and operation of the appliance.
- Page 6 CONNECTING GAS SUPPLY LINE The gas inlet of the griddle is sealed at the factory to prevent entry of dirt. Do not remove this seal until the actual connection is made to the gas supply line. CHECKING FOR GAS LEAKS Soap and water solution or other material acceptable for the purpose shall be used in locating gas leakage.
-
Page 7: Grease Pan
SEASONING THE GRIDDLE HEATING SURFACE Clean the griddle surface thoroughly. After the griddle has been thoroughly cleaned, it should be seasoned to prevent food from sticking. Before using, and after each thorough scouring, season the griddle heating surface in the following manner: 1. - Page 8 Visit our Website at: www.star-mfg.com Email: service@star-mfg.com THOROUGHLY INSPECT YOUR UNIT ON ARRIVAL This unit has been tested for proper operation before leaving our plant to insure delivery of your unit in perfect condition. However, there are instances in which the unit may be damaged in transit. In the event you discover any type of damage to your product upon receipt, you must immediately contact the transportation company who delivered the item to you and initiate your claim with same.
- Page 9 STAR MANUFACTURING INTERNATIONAL, INC. MODEL 624MD,624TD, 624TSPD, 624TCHSD SK1980 REV A 05-9-03...
- Page 10 MODEL 624MD,624TD, 624TSPD, 624TCHSD STAR MANUFACTURING INTERNATIONAL, INC. SK1988 05-9-03...
-
Page 11: Parts List
PARTS LIST February 22, 2007, Rev C 624MD-LP, 624TD-LP, 636MD-LP, 636TD-LP, 648MD-LP, 648TD-LP 24", 36" and 48" Star-Max Gas Griddles MODEL Number Part Number Number Description and Model Designation Unit G3-624305 GRIDDLE PLATE ASSEMBLY 624MD-LP G3-636305 GRIDDLE PLATE ASSEMBLY 636MD-LP... - Page 12 PARTS LIST February 22, 2007, Rev C 624MD-LP, 624TD-LP, 636MD-LP, 636TD-LP, 648MD-LP, 648TD-LP 24", 36" and 48" Star-Max Gas Griddles MODEL Number Part Number Description and Model Designation Number Unit G3-Z4398 BULB CLAMP 624TD-LP G3-Z4398 BULB CLAMP 636TD-LP G3-Z4398 BULB CLAMP...
Need help?
Do you have a question about the 624MD-LP and is the answer not in the manual?
Questions and answers