Related Manuals for Dillenger Outlaw
Summary of Contents for Dillenger Outlaw
- Page 1 Outlaw Thank you for purchasing an Outlaw, please read this manual before using your new electric bike.
- Page 2 Before the first use, please fully charge the battery, this can take up to 6 hours. The smart charger will turn off the charging current once the battery is full and will NOT overcharge the battery. Also ensure the tyre pressures are correct, check that all the nuts and bolts on the bike are secure.
- Page 3 Lights The bike is fitted with a front light. With the display turned on, press and hold the “UP” arow on the control pad to turn on the front light. Turning the bike off will also turn the light off. Battery Charging The charge port is located on the side of the down tube.
- Page 4 FREQUENTLY ASKED QUESTIONS Q: DO I NEED TO “BREAK IN” MY BATTERIES? A: Yes, it is recommended that you perform a “break-in” cycle consisting of three discharge/charge cycles to allow your batteries to reach optimum performance. This involves three complete discharges and three complete recharges. After this initial “break-in”...
- Page 5 Already described above, but you may notice this during the winter. If the range is significantly reduced, it could be because the battery is operating in much lower temperatures. Your battery could possibly benefit from a complete conditioning cycle, this allows the battery to re-learn its full capacity and charge state.
Need help?
Do you have a question about the Outlaw and is the answer not in the manual?
Questions and answers