Advertisement
• Set your phone to discover 'reTrax' and follow the instruction
• If your phone asks for a passkey or PIN code, confirm with '0000' (4 zeroes).
When the phone and reTrax are paired and connected, the reTrax's status
indicator will flash blue.
4. Pairing Your reTrax with Two Bluetooth® wireless technology enabled phones
(Multi-point Pairing)
reTrax supports a Multi-point function to allow simultaneous pairing of reTrax
with two smartphones.
• Pair reTrax with the first phone (follow the steps above in "Pairing reTrax").
• Turn off reTrax, the first paired phone is then disconnected automatically.
• Pair the reTrax with the second phone (follow the steps above in "Pairing reTrax").
5. Reconnecting Your reTrax
• If reTrax has been powered off, it will reconnect to the phone automatically
after switching on reTrax, if not, press Multi-function button once to
manually reconnect.
• If the phone has been powered off and reTrax is then disconnected, you need
to press Multi-function button once to reconnect when phone turns on again.
Else, reTrax will turn off automatically.
6. Using reTrax
Function
Incoming Call
Answer a Call
Answer a Second
Call
Reject a call
Button
(Headset)
--
4 Beeps for
every 2 seconds
Press Multi-
function button
once to accept.
Press "Hold and
Answer" button
from your
phone
Press the Multi-
function button
twice
Audio
Audio (Speaker)
Ringtone
--
'Di Do' tone once
--
--
'Di Do' tone once
Status Indicator
Blue light flashes
During the call,
blue light flashes
every 6 seconds
--
During the call,
the blue light
flashes in every 6
seconds
Blue light flashes
once
5
Advertisement
