Troubleshooting - Sony Ericsson t68i User Manual

Automatic
If the phone lock is set to automatic, you do not need to
enter your phone lock code until a different SIM card
is inserted in the phone.
• To edit your phone lock code, scroll to Settings/Locks/
Phone lock/Change code.
Note: It is important that you remember your new
code. If you should forget it, you have to hand in your
phone to your local Sony Ericsson retailer.
To set the phone lock
1. Scroll to Settings,
YES
Protection, .
YES
2. Select an alternative and press
3. Enter the phone lock code and press
76

Troubleshooting

, Locks, , Phone lock,
YES
.
YES
.
YES
Troubleshooting
This chapter lists some problems that you might
encounter while using your phone. Some problems
require that you call your service provider, but most
of the problems you can easily correct yourself.
The phone cannot be switched on
Hand-held phone
Recharge or replace the battery. See "SIM card and
battery information" on page 4.
,
YES
No indication of charging
When you start charging a battery that is empty or a
battery that has not been used for a long time, it may
take up to 30 minutes before the battery icon appears
in the display.
Menu language
If the display shows a language that you do not
understand, you can always choose Automatic
(determined by your SIM card) by pressing
8888 in standby. You can always choose English
by pressing 0000 in standby.