Philips QG3371 User Manual page 14

EnGlish
14
Problem
The combs
do not stay
attached to
the handle.
2 Remove the back and/or front panel of the
appliance with a screwdriver. If necessary,
also remove additional screws and/or parts
until you see the printed circuit board with the
rechargeable battery.
3 If necessary, cut the wires to separate the
printed circuit board and the rechargeable
battery from the appliance.
Guarantee and support
If you need information or support, please visit
www.philips.com/support or read the separate
worldwide guarantee leaflet.
troubleshooting
Possible Solution
cause
You do Slide the comb into the guiding grooves
not attach on both sides of the handle until you
the comb hear a click.
correctly.
The guiding Clean the appliance and the guiding
grooves are grooves thoroughly.
dirty.
The comb is Go to your Philips dealer or contact a
broken. Philips service centre to purchase a new
comb.