General - LG 27MU67 Owner's Manual

24
UseR seTTInGs

General

1
To view the osD menu, press the Menu (
the bottom of the monitor.
2 Go to General using the monitor buttons.
3
Configure the options following the instructions that appear in
the bottom right corner.
4
Set the desired option and press the
5
Use Menu ( ) or the
Each option is described below.
Menu > General
language Sets the menu screen to the desired language.
sMaRT eneRGY Conserve energy by using luminance compensation algorithm
saVInG
High
low
off
Power leD Turns the power LED on the front of the monitor on or off.
on
off
automatic Feature that automatically turns off the monitor when there is no movement on the screen for a
standby period of time. You can set a timer for the auto-off function. (Off, 4 H, 6 H, and 8 H)
DisplayPort 1.2 Enables or disables DisplayPort 1.2.
Be sure to configure this option according to the DisplayPort version supported by your
y
graphics card. Set this option to Disable if your graphics card does not support DisplayPort
1.2.
osD lock Prevents incorrect key input.
on
off
All features are disabled except Brightness, Contrast, Volume, Input in Quick Settings,
y
OSD Lock in General, and the Exit button.
noTe
Saving Data depends upon the panel. These values vary by panel and vendor. If option of SMART
y
ENERGY SAVING is High or Low, monitor luminance becomes higher or lower depending upon the
source.
) button at
button.
button to exit the OSD menu.
Saves energy using the high-efficiency SMART ENERGY SAVING feature.
Saves energy using the low-efficiency SMART ENERGY SAVING feature.
Disables the SMART ENERGY SAVING feature.
The power LED turns on automatically.
The power LED turns off.
noTe
Disables key input
Enables key input
noTe
General
language
Quick
settings
sMaRT eneRGY saVInG
Power leD
PbP
automatic standby
DisplayPort 1.2
Picture
osD lock
General
Reset
◄: Back
Description
>
english
>
low
>
off
>
off
>
enable
>
off
▲/▼: Move / ►: Ok