Installing the Monitor
assembling the stand
1
2
stand body
CaUTIon
Remove the tape attached to the stand body
y
before assembling the stand.
3
4
stand base
5
Tape
To protect the screen from scratches, cover
y
the surface with a soft cloth.
Illustrations in this document represent typi-
y
cal procedures, so they may look different
from the actual product.
Applying excessive force when tightening
y
screws may cause damage to the monitor.
Damage caused in this way will not be cov-
ered by the product warranty.
Do not carry the monitor upside down by just
y
holding the base. This may cause the moni-
tor to fall off the stand and could result in
personal injury.
When lifting or moving the monitor, do not
y
touch the monitor screen. The force applied
to the monitor screen may cause damage to
it.
You can disassemble the stand in the
y
reverse order of the assembly.
asseMblInG anD PRePaRInG
CaUTIon
noTe
7