Sears, Roebuck and Co. 103.22160 Operating Instructions And Parts List Manual

Download this manual

-_/

LITHOGRAPHED

SOURCE FORM 37979

OPERATING INSTRUCTIONS

AND PARTS- LIST FOR

BENCH

The model number of your Bench Saw will be found on

a plate on the rear of the Base. Always mention this

model number when communicating with us regarding

your Bench Saw or when ordering parts.

-=tnstf'uctions

All parts listed herein must be ordered through a Sears

retail store or mail order house.

prepaid. When ordering repair parts, always give the

following information:

1. The Part Number.

2. The Part Name and Price.

3. The Model Number 103.22160.

This list is valuable. It will assure your being able to

obtain proper parts service. We suggest you keep it with

other valuable papers.

SEARS, ROEBUCK and CO.

IN U. S. A.

SAW

8 INCH

rqr

OrderIng Parts

Parts are shipped

Table of Contents

Page 1: Operating Instructions
1. The Part Number. 2. The Part Name and Price. 3. The Model Number 103.22160. This list is valuable. It will assure your being able to obtain proper parts service. We suggest you keep it with other valuable papers.
Page 2 OPERATING INSTRUCTIO~S AND PARTS LIST FOR 8 INCH BENCH SAW Model 103.22160 FIGURE Careful planning, preCISIOn machining, and rigid Motor Mount inspection have all contributed toward maintaining Install as shown in Fig. 2 and outlined under "Instal- the high standard of quality found in this tool.
Page 3 Draw a line on the bench 5 inches from the The elevation screw, No. 76. rear of the Saw base. (Measure at two points The motor rail, No. 21. • 12 inches apart to be sure that the line is par- allel to the rear of base.
Page 4: Operation
CARE OF THE BLADE: Keep the blade teeth sharp and properly set. IAISE .LADE ,'AI INC"S To sharpen the blade; DISTANCE'SHOULD 1. Lower the blade until an oil stone laid on the BE EOUAL. table will just touch the teeth. Rotate the TURN BLADE- MEASURE FROM...
Page 5 ,/ j 32_.~, ,../.--20 •• 31 30 28 27 MOTOR MOUNT COMPlETE J-;- FENCE ASSY. COMPLETE _128 ITER GAGE ASSY. COMPLETE...
Page 6: Parts List
PARTS LIST Prepaid Prepaid Order Selling Order Selling Illust. Illust. Price Price Part No. PART NAME Each Part No. PART NAME Each 37009 Base ..•..•..•...•..$ 11.00 18036-A Motor pulley with set screw-2 % inch single X-1376 Speed nut No. 6.32 groove V-pulley % inch bore.