Related Manuals for ARIETE 5577/6
Summary of Contents for ARIETE 5577/6
- Page 1 MOD. 5577/6 De’ Longhi Appliances Srl Divisione Commerciale Ariete Via San Quirico, 300 50013 Campi Bisenzio (FI) - Italy E-Mail: info@ariete.net Internet: www.ariete.net 827070...
- Page 2 Fig. 7 Fig. 8 Fig. 9 Fig. 1 Fig. 10 Fig. 11 Fig. 12 Fig. 2 Fig. 3 Fig. 13 Fig. 4 Fig. 5 Fig. 6...
-
Page 3: Residual Risks
WITh regArd To ThIs mAnuAl Even if the appliances are made in conformity with the European regulatory specifications in force and therefore all poten- tially hazardous parts are protected. Carefully read these warnings and use the appliance only for the use it is designed for in order to prevent accidents and damage. - Page 4 without supervision. • Do not leave the packaging near children because it is potentially dangerous. • In the event that this appliance is to be disposed of, it is suggested that the power chord is cut off. It is also recommended that all potentially dangerous components are rendered harmless to prevent children hurting themselves when playing with the apparatus.
-
Page 5: Description Of The Appliance
• Do not use the appliance if the power cord appears to be damaged, with parts bearing burns, etc...; an authorised Ariete service centre must repair and replace the power cable; under penalty of the warranty being forfeited. -
Page 6: Dry Ironing
InsTrucTIons for use Warning! remove any labels and protections from the soleplate before using the appliance for the first time. filling the tank before use Warning! Make sure the appliance is unplugged from the supply mains before filling the tank with water. The possible presence of water, condensate or moisture in the tank indicates only that the appliance has been tested. -
Page 7: Steam Ironing
(L button) and set the thermostat knob (E) to the desired temperature without pressing the steam buttons (H) or (G). The indicator light (D) of the iron will turn on and turn off when the iron has reached the temperature. sTeAm IronIng •••... -
Page 8: After Ironing
To avoid pure wool, silk and synthetic materials becoming shiny, it makes good sense to iron them on the reverse side. For other materials, especially velvet, which can become shiny very easily, cover them with a cloth and iron in one direction only, using light pressure.