Centrix Q50 User Manual page 11

Additionally, users can change the IP Camera's network property, either DHCP or Static
IP, directly in the device finding list. Refer to the following section for changing the IP
Camera's network property.
Example of Changing IP Camera's Network Property
Users can directly change an IP Camera's network property, ex. from static IP to DHCP,
in the finding device list. The way to change the IP Camera's network property is speci-
fied below:
Step 1:
Step 2:
Step 3:
Step 4:
Step 5:
11
In the finding device list, click on the network Speed Dome Camera that is
wished to change its network property. On the selected item, right click and
select <Network Setup>. Meanwhile, record the IP Camera's MAC address, for
future identification.
The <Network Setup> page will come out. Select <DHCP>, and click on <Ap-
ply> button down the page.
Click on <OK> on the Note of setting change. Wait for one minute to re-search
the IP Camera.
Click on the <Device Search> button to re-search all the devices. Then select
the IP Camera with the correct MAC address. Double click on the IP Camera,
and the login window will come out.
Enter User name and Password to access the IP Camera.