Datawind 7c+ EDGE Service Manual page 65

It will load all the image files.
Step 3: Click on the Download.
Step 4: Power off the Device and disconnect from computer if connected.
Step 5: Put the device into recovery mode by continues pressing volume (-) key and toggle pressing
power key 4-5 times.
Step 6: Keep on pressing volume (-) key and connect the device to computer using data cable. (In case of
3G5 uninstall the battery and connect to computer using USB cable and then again install the battery)
65 Datawind Properietry:should not be shared without permission
Click on
Download
Prepared by- Vikas Kumar
.
.