Mounting Legs And Wheels; Section One: Assembly Instructions - Traeger TFB30LZAC Owner's Manual

SECTION ONE: ASSEMBLY INSTRUCTIONS

MOUNTING LEGS AND WHEELS:

1. Insert Leg Left Front (64) onto Grill Frame Assembly (1) so the holes align and insert
1/4-20 x screw (73) into hole on the backside install washer (63) and nut (73) and leave
loose.
2. Insert Leg Left Rear (65) onto Grill Frame Assembly (1) so the holes align and insert
1/4-20 x screw (73) into hole on the backside install washer (63) and nut (73) and leave
loose.
3. Insert Leg Right Front (67) onto Grill Frame Assembly (1) so the holes align and insert
1/4-20 x screw (73) into hole on the backside install washer (63) and nut (73) and leave
loose.
4. Insert Leg Right Front (66) onto Grill Frame Assembly (1) so the holes align and insert
1/4-20 x screw (73) into hole on the backside install washer (63) and nut (73) and leave
loose.
5. Insert Axle rod (68) into holes provided on both right legs (66, 67). Insert Wheel (69)
onto Axle (68) then insert Washer (70) and Nut (71) onto Axle and tighten. Repeat the
process on the other side of the Axle (68).
6. Stand the grill up on its legs and then tighten the leg bolts. Do not over tighten the
Screws.
.