Memory Seats - Chevrolet Impala 2016 Owner's Manual

58 Seats and Restraints
2. Move the seatback to the
desired position, and then
release the lever to lock the
seatback in place.
3. Push and pull on the seatback
to make sure it is locked.
To return the seatback to the upright
position:
1. Lift the lever fully without
applying pressure to the
seatback, and the seatback will
return to the upright position.
2. Push and pull on the seatback
to make sure it is locked.
Power Reclining Seatbacks
To adjust a power seatback:
Tilt the top of the control
rearward to recline.
Tilt the top of the control forward
to raise.

Memory Seats

If equipped, the 1, 2 SET, and
(Exit) buttons on the driver door are
used to manually store and recall
memory settings for the driver seat,
outside mirrors, and power tilt and
telescoping steering column (if
equipped).
Storing Memory Positions
To store positions to the 1 and 2
buttons:
1. Place the ignition in ON/RUN
or ACC/ACCESSORY
2. Adjust the driver seat, power tilt
and telescoping steering
column (if equipped), and the
outside mirrors to the desired
position.
3. Press and release SET. A beep
will sound.
4. Immediately press and hold 1
until two beeps sound.
5. Repeat Steps 1 4 for a second
driver using 2.
To store positions to the
button and easy exit features,
repeat Steps 1 4 using
your position for getting out of the
vehicle.
Manually Recalling Memory
Positions
Press and hold 1, 2, or
manually recall the previously
stored memory positions. Releasing
(Exit)
to store
to