Chevrolet Impala 2016 Owner's Manual page 166

While the USB source is active, use
the icons on the screen to operate
USB function:
(Seek Previous/Fast Reverse):
Press to seek to the beginning of
the current or previous track.
If the track has been playing for
less than five seconds, it seeks
to the previous track. If longer
than five seconds, the current
track starts from the beginning.
Press and hold to fast reverse
through a track. Release the
button to return to playing
speed. Elapsed time displays.
(Seek Next/Fast Forward):
Press to seek to the next track.
Press and hold to fast forward
through a track. Release the
button to return to playing
speed. Elapsed time displays.
/ (Pause/Play): Press to pause.
Press again to resume.
Z Z
(Shuffle): Press to play the
songs in random order. Press again
to turn off.
USB Menu
Press the MENU knob to display the
USB menu and the following may
display:
Browse : Select to display the files
and folders on the USB device.
Tone Settings : Select to adjust
Bass, Midrange, Treble, Balance,
Fade, and EQ (Equalizer). See
Tone Settings under AM-FM Radio
0 161.
Auto Volume : If equipped, this
feature adjusts the volume based on
the vehicle speed. Select the level
between off, low, medium-low,
medium, medium-high, and high.
Press BACK to go to the
previous menu.
EQ (Equalizer) Settings :
If equipped, this feature adjusts the
pre-defined EQ Modes. See EQ
(Equalizer) Settings in AM-FM
Radio 0 161.
DSP Modes : If equipped, this
feature adjusts the DSP Modes.
See DSP Modes in AM-FM Radio
0 161.
Infotainment System
®
Playing from an iPod
This feature supports the following
iPod models:
®
iPod nano (1st, 2nd, 3rd, and
4th generation)
iPod with video (5.0 and 5.5
generation).
®
iPod classic (6th generation)
®
iPod touch (1st and 2nd
generation)
There may be problems with
operation and function in the
following situations:
When connecting an iPod on
which a more recent version of
the firmware is installed than is
supported by the infotainment
system.
When connecting an iPod on
which firmware from other
providers is installed.
To connect and control an iPod:
1. Connect one end of the
standard iPod USB cable to the
iPod's dock connector.
165