Sony HVR-S270E Operating Manual page 123

1
2
3
4
5
6
7
8
A LIGHT MAN/AUTO switch
Select AUTO or MAN to automatically or
manually turn on and off a video light
connected to the LIGHT connector.
AUTO: The video light automatically turns
on upon a start of recording when its power
switch is in the on position.
MAN: You can manually turn on and off the
video light with its power switch.
B DIGITAL EXTENDER/L1 button (49)
C Lens cover lever (13)
D AGC switch (34)
E GAIN switch (34)
F OUTPUT/DCC switch
Switches the video signal, which is output
to the VTR part, viewfinder, and video
monitor from the camera part, between the
following two.
BARS: Outputs the color bar signal.
CAM: Outputs the video signal from the camera.
When this is selected, you can switch DCC* on
and off.
* DCC (Dynamic Contrast Control): Against a
very bright background with the iris opening
q;
w; ql qk
adjusted to the subject, objects in the
background will be lost in the glare. The DCC
function will suppress the high intensity and
restore much of the lost detail and is particularly
effective in the following cases.
• Recording people in the shade on a sunny day
• Recording a subject indoors, against a
background through a window
• Any high contrast scene
OUTPUT: CAM, DCC: ON
The video signal from the camera is output,
and the DCC circuit operates.
OUTPUT: BARS, DCC: OFF
A color bar signal is output and the DCC
circuit does not operate. Use this setting to
adjust the video monitor, to record the color
bar signal, etc.
SHOT TRANSITION/
FOCUS MARKING
CHECK
ST ORE EXEC
9
A B
qa
qs
qd
qf
qg
qh
qj
OUTPUT: CAM, DCC:
OFF
The video signal from
the camera is output,
and the DCC circuit does
not operate.
Continued ,
123