Sony HVR-S270E Operating Manual page 102

Troubleshooting (Continued)
• Set the CH1 switch to AUTO.
• Set the INPUT1 switch to an appropriate position for the device connected to the AUDIO
INPUT1(L) jack.
• Make sure that the connector of the cable connected to the AUDIO INPUT1(L) is locked.
• For 2CH/FS48K recording, set CH1 of the REC CH SELECT switch to IN1.
Playback
If you are playing back pictures stored on a "Memory Stick Duo," refer also to the Cassette
tapes/"Memory Stick Duo" section (p. 98).
You cannot play back tape.
• Set the POWER switch to ON and the CAMERA/VCR switch to VCR.
• Rewind the tape (p. 56).
Image data stored on a "Memory Stick Duo" cannot be played back correctly.
• Image data cannot be played back if you have modified file names or folders, or have edited
the data on a computer (In this case, the file name flashes). This is not a malfunction (p. 111).
• Pictures recorded on other devices may not be played back correctly. This is not a
malfunction.
The data file name is displayed incorrectly, or flashing.
• The file is damaged.
• The file format is not supported on your camcorder (p. 107).
• Only the file name is displayed if the folder structure does not conform to the universal
standard.
Horizontal lines appear on the picture. The displayed pictures are not clear or
do not appear.
• Video head is dirty. Clean the head using the cleaning cassette (optional) (p. 114).
You cannot hear the sound recorded with 4CH microphone recording on your
camcorder.
• Confirm the setting of AUDIO MONITOR switch (p. 48).
No sound or only a low sound is heard.
• Turn up the volume (p. 57).
• Pictures recorded using [SMTH SLW REC] do not have sounds.
The picture or sound breaks off.
• The tape was recorded in both of the HDV and DVCAM (DV) formats. This is not a
malfunction.
102