Samsung RS25J50 User Manual page 21

Flooring
f
!
I
J
For proper installation, you must place this
refrigerator on a level, hard surface that is
the same height as the rest of the floor.
This surface should be strong enough to
support a fully loaded refrigerator.
To protect the finish of the flooring during
installation, cut a large section of the
cardboard carton and place it under the
refrigerator where you are working.
When moving the refrigerator, you need to
pull and push it straight forwards or back.
Do not wiggle it from side to side.
Z_ CAUTION
• When installing, servicing or cleaning
behind the refrigerator, be sure to pull
the unit straight out and push back in
straight after finishing.
Important: Make sure that you can easily
move your refrigerator to its final location
by measuring doorways (both width and
height), thresholds, ceilings, stairways, etc.
The following chart details the exact height
and depth of this Samsung Side by Side
Refrigerator.
NOTE
. Make sure you disconnect the water
supply line BEFORE removing the freezer
door.
To avoid damage, refer to "2. Separate
the water supply line from the
refrigerator" in the manual (page 25).
English 21
DA68-02981N-00.indb 21 2015.3.3. nn 9:34