Selecting Parameters
The Display
In Multi Edit Mode, the top line of the display shows the current Mode, Page, and current
selected Zone.
Current Parameter
Changing Zones
Use the Channel / Zone Up and Down buttons to change the currently selected Zone.
The top right corner of the display of the MAIN & CONTROLS pages always shows the
currently selected Zone out of the four Zones. Pressing the Zone Up button in Zone 4 will
wrap to Zone 1 and pressing the Zone Down button in Zone 1 will wrap to Zone 4.
Current Page
Soft button options for Multi Edit mode
Multi Edit Mode
Selecting Parameters
Current Zone
9-3